Menu
Create yours

Where should the QR code go at a wedding or party?

The spots where guests actually stop and scan, how big to print the QR code, and how many signs and table cards you need for a wedding or party.

Guests scan when they are standing still with a free hand and a reason to take their phone out. A sign on a wall by the door, passed at walking pace, gets far fewer scans than a card on the table where someone sits for an hour. Put your signs where people pause.

The spots that work

  • The welcome table or guest book table. Everyone passes it on the way in. A large A4 or A3 sign here does most of the work, and it tells guests early that there is somewhere to send their photos.
  • Every table. A small A5 card in the middle, or a table card beside the number. Speeches, toasts and the wait between courses are when guests are sitting with their phones and the photos they have just taken.
  • The bar. People queue there with their phones already out.
  • The photo booth, the dessert table and the cake. These are the places people photograph most, so a reminder right beside them is well timed.
  • The exit. "Before you go, share your photos." Many guests send their best shots on the way home, or the next morning, once they have had a chance to look through them.

Spots to skip

  • Behind glass or in a glossy frame. Reflections from overhead lights can hide part of the code from the camera.
  • Very dark corners. A phone camera needs some light to read a code. If the room dims for dancing, keep at least one sign near a lamp or the bar.
  • Up high or far away. A code above head height on a wall is hard to frame, and anything too far away needs a much bigger print.

How big to print

As a rule of thumb, a phone reads a code from about ten times its width. The code on Keepsake's A5 card is about 7 cm across, which reads from about 70 cm away: right for a card on a table that guests can reach.

For a sign people read from across a room or from the back of a queue, print the code larger. A code 15 cm across reads from about a metre and a half, and 20 cm from about two metres. When in doubt, go bigger: nobody minds a larger code, and a small one that does not scan from where guests stand is easy to walk past.

How many you need

A good starting point is one large sign at the entrance, one card on every table, and one more at the bar or the exit. For a smaller gathering, such as a birthday at home or a dinner for twenty, a single sign plus a couple of cards is usually enough.

Every copy carries the same code. You do not need a different code for each table, and every photo ends up in the same guest book whichever sign a guest scanned.

Think about the whole day

If your event moves, from a ceremony to drinks to a reception, put a sign in each place. Guests take different photos at each stage, and a sign in the room they are in is the one they will use. A short mention from the microphone helps too, especially early in the evening, when people are settled and before the dancing starts.

If you leave a tablet or phone at the venue in booth mode, set it up next to your main sign. Guests without their own phone handy, or who would rather not use it, can add a message there instead.

Print and place them early

Print one sign first and scan it from where a guest would stand, in light like the venue's. Once it works, print the rest. Give the cards to whoever is setting up the tables, so they go out with the place settings and nobody has to remember them on the day.

Keepsake's sign designer has table cards, a welcome sign and sheets of cards, with your names, date and colour. See QR code signs for your guest book, or start your guest book and your QR code appears straight away.

Put it into practice

Create your guest book and print your QR code.